Wardrobe Maintenance Knowledge Series Of Leather Wardrobe Door How To Maintain

< p > > a href= "http://sjfzxm.com//business/" > Leather > /a > top grade of wardrobe door, but in the course of using, are consumers worried about wardrobe bad, do not know how to maintain it? Little editor, teach you how to maintain leather wardrobe. < /p >
< p > [best answer] < /p >
< p > 1. leather dust should be dusted or soft cloth dusted outside the outer door of the wardrobe. If the surface is stained, use sand polish to remove it. Conditionally regular maintenance of oil wax for finishing. < /p >
< p > 2.. Hardware parts should be cleaned with dry soft cloth. Do not clean with chemical cleanser or acidic liquid. If it is found that the black spots are difficult to remove, it can be scrubbed with a small amount of alcohol. < /p >
< p > 3 < a href= "http://sjfzxm.com//business/" > avoid "/a" > external force impact, smash slide rail and door plank push and pull gently, avoid violence, pull against the cabinet, seal the edge can not touch the water and other liquid solvents to avoid the edge drop. < /p >
< p > 4., adhere to the ventilation and dryness of the environment, and keep the cabinet cool and dry. Wooden leather wardrobe doors are usually scrubbed with clean cotton cloth. If they are dirty, they can use soapy water or neutral detergent to scrub with damp cloth. < /p >
< p > 5. light rail door pulley has been used for a long time. Announcing the sound is normal appearance to ensure that the pulley is durable and smooth. Please add lubricating oil along the upper and lower pulley regularly every 2-3 months. When indoor air or climate is too wet, please open doors and windows regularly, ventilate and place small packets of dry lime or other dry agents in the corner of leather wardrobe doors to avoid mould and deformation of cabinet and door panels. < /p >
< p > 6. < a href= "http://sjfzxm.com//business/" > long time < /a > the use of moving door dustproof bar can have slight glue appearance, can be glued with 502 glue. The upper rail positioner shows a gap in the position. Six angle wrench can be used to push the positioner to the side plate and push it to the seam. The sliding door presents a skew representation to the right skew. Six angle wrench can be used to adjust the left bottom wheel clockwise or the right bottom wheel to counter clockwise. < /p >