HC500- III Comber

< p > > a href= "http://? Www.sjfzxm.com/news/index_c.asp" > HC500- III < /a > combing machine original unstopping roll down technology, large coil assembly technology, real-time on-line pressure control system of cotton lap, ensuring the cotton yarn weight unevenness is lowest, yarn index consistency is good, at the same time, greatly reduces workers' labor intensity, production efficiency has been greatly improved.

< /p >

< p > its maximum production speed reaches 550 clamp points / points, which is more than 20 higher than that of domestic combing machines. It has high efficiency and energy saving. Compared with that of the conventional combing machine, it has a power saving of about 20 more than that of a ton piece, and the machine has small vibration, low noise, smooth operation, and high reliability under high speed and high yield conditions.

Optional 90 degrees and 111 degrees Xilin can be used to meet the needs of textile low, medium and < a href= "http://? Www.sjfzxm.com/news/index_c.asp" > high count yarn > /a >.

< /p >

< p > > a href= "http://? Www.sjfzxm.com/news/index_c.asp" > machine < /a > adaptability to short fibers. The lowest fiber length can be 22mm. The whole system is optimized with no mark overlap technology, cotton net is clear and conformance. The average comber's eye rate is 8%, while the machine's eye rate is only 1.6%.

< /p >

< p > related links: < /p >

< p > CJ66 high speed cotton combing locomotive has high speed, weight and good spinning speed, and the speed can reach 450 tongs per minute.

The machine adopts steel frame, and the whole machine is divided into two sections, with only one flexible pmission joint, which is convenient for users to install and debug quickly.

< /p >

< p > the unique separation mechanism is directly driven by the conjugate cam mechanism, which not only effectively reduces the accumulative error of the multi bar mechanism, but also can better meet the desired separation motion curve requirements.

The conjugate cam mechanism has advantages of small inertia and unbalance inertia, good dynamic performance and more suitable for high speed production.

< /p >

< p > CJ66 high speed cotton comber optimizes the movement mechanism of the nipper, reduces the inertia force and inertia moment of the high speed reciprocating motion of the clamp plate assembly, reduces the abrupt angle of the sound and the instantaneous impact force of the clamping plate, and enhances the smoothness of the machine operation.

< /p >

< p > machine adopts equal spacer carding design. The minimum carding spacing is 0.31mm, and the Xilin needle row combination can be adjusted. According to the needs of spinning different products, 90 degrees and 112 degrees are chosen to ensure the carding quality of comber.

< /p >