Introduction Of Leather Gloves Maintenance And Collection Methods

Introduction of leather gloves maintenance and collection methods

(1) avoid water: skin tissue will expand and soften when it meets water.

Deformation.

(two) avoid roasting: after the leather gloves are wet, they should be placed in the ventilating and drying place, so that the moisture will evaporate as soon as possible, and must not be exposed to the sun or roasted with the fire, so as to prevent the leather from hardening and cracking.

(three) avoid pollution: when cleaning and cleaning gloves, wipe the dust on the leather surface with dry cloth first, then apply the maintenance oil.

(four) avoid pressure: it will damage the elasticity of glove leather surface, and the appearance and shape will also be affected.

The above is not only a fear of leather gloves, but also applies to all leather products. Of course, if we are not careful enough to meet these conditions, how do we deal with them? Please refer to the following instructions.

Mildew

Located in damp environment, leather gloves are not used for a period of time.

Oil will easily become moldy. If the gloves are moldy, wipe the mouldy part with soft dry cloth. If the situation is serious, use the half dry wet clean towel to wipe the mildew spots first, then put the gloves in the ventilated place and let it dry. After drying, you can apply some leather maintenance oil on the surface of the foreskin (generally do not apply to the skin part). It can maintain leather gloves and have a clean effect of two degrees. However, if you are very fond of your famous brand gloves, it is advisable to buy the special maintenance oil better.

rain

What should we do when we get caught in a rain on our bicycling? We must deal with it immediately after drenching. We must deal with it immediately after drenching. We must use dry towel to suck up the moisture and put it in good ventilation and dry air. We must not bake in the sun or roast with hot air. Otherwise, the leather will be damaged and hardened. After treatment, the gloves can remember the maintenance oil, which will restore the gloss and softness of the gloves.

Contamination

The dirt on leather gloves is usually contaminated by sweat, liquid pigments, oil and other three kinds of pollution sources. Among them, the trickle is the liquid pollution source. Because of its small molecules, it is easy to penetrate into the leather fibers. Even if it is not polished immediately, it can not prevent the penetrating liquid pollution. The general way of treatment is to wipe it clean with dry cloth first. After the source is dried, wipe the oil with cleansing oil. As for the treatment of oil pollution, it is also to use the maintenance oil containing clean effect.

It should be noted that when using this kind of cleansing oil containing cleansing effect, sensitive test should be done at the first place, so as to avoid the problem of glove color and affect the appearance.

In addition to the appearance of contamination, leather gloves are easily stained with sweat secretions because of their direct contact with the hands. If they are not disposed of, they will easily cause the gloves to become smelly and moldy. The way of treatment is to use cotton balls to mix the mixture of medicine and water in about 50% proportions, wipe them inside the glove, and then place them in the ventilating place to dry. If the already smelly gloves can increase the proportion of the fine, but do not use the industrial scale, but do not use the industrial essence, because the industrial essence will cause the glove fading and the damage of the cortex.

If gloves are not used, they should be collected. They should first wipe the maintenance oil and put them in plastic bags, and then store them in order to avoid dust.

Collecting unused gloves is best to be used once a month and oiled. Just wipe a thin layer, because gloves are put on hold and not oiled. After a long time, leather will harden and easy to damage.

In addition, oil should also be careful not to put more oil on the gloves, soften the gloves, keep the gloves in a certain hardness and shape, so that they can feel comfortable when riding a motorcycle.